Bev-Rite
Pleated Polyethersulfone Membrane Cartridges
The Bev-Rite pleated membrane filters are specifically engineered to provide a barrier to beverage spoiling microorganisms. The Bev-Rite incorporates a highly asymmetric polyethersulfone membrane within our exclusive pleat support configuration creating one of the industry's most rugged bacteria removal filters. This exceptionally robust filter design means filter performance will remain effective after multiple steam sterilization cycles. Every Bev-Rite filter is integrity tested and flushed with high purity water to assure product performance and purity.
Quality Compliance
- All materials are listed in Title 21 of the US Code of Federal Regulations 177-182
- Component materials meet the bio-safety criteria of the USP Reactivity Test for Class VI Plastics
- Component materials meet the "non-fiber releasing" criteria as defined in 21 CFR 210.3 (b) (6)
- Bev-Rite cartridges are manufactured in a facility whose Quality Management System is approved by an accredited registering body to the ISO 9001:2008 standard
- Bev-Rite cartridges are 100% integrity tested and DI flushed
- Absolute-rated and integrity tested membrane provides reliable, consistent and repeatable filtrate to ensure microbiological stability
- Low pressure drops yield higher flow rates and reduced processing time
- Non-fiber shedding Polypropylene support materials eliminate fiber migration
- MAXX-imum Pleat Design for greater surface area, ensuring longer service life, fewer changeouts and reduced operating costs per element
- 100% Thermally bonded construction
- Low hold-up volumes
- High strength design allowing for extended use and multi autoclave and hot water sanitization cycles
- 316 Stainless steel insert standard
| Materials of Construction | |
|---|---|
| Filter Media: | Polyethersulfone |
| Support Material: | Polypropylene |
| End Caps: | Polypropylene |
| Reinforcing Rings: | 316 Stainless Steel |
| Cage/Core: | Polypropylene |
| Sealing: | Thermal Bond |
| Seals: | Silicone, EPDM |
| Dimensions | |
| Outside Dia: | 2.7" (6.87cm) |
| Lengths: | 10" (25.4cm), 20" (50.8cm), 30" (76.2cm), 40" (102cm) |
| Effective Filtration Area: | 7ft2 (0.65m2) |
| Performance Specification | |
| Absolute Rated Retention: | 0.20μm, 0.45μm, 0.65 μm, 0.80μm |
| Maximum Forward Differential Pressure | |
| Forward: | 75 psid (5.5 bar) @ 75°F (24°C) 40 psid (2.8 bar) @ 180°F (82°C) |
| Reverse: | 50 psid (3.4 bar) @ 75°F (24°C) |
| Maximum operating Temperature | |
| 180°F (82°C) Continuous Duty | |
| Sterilization | |
| Cartridge can be sterilized via steam or Autoclave: 20 times at 275°F (135°C) Cartridge may be sanitized in place with common sanitizing agents, contact factory for chemical compatibility |
|
| Integrity Test Values | |||
|---|---|---|---|
| Pore Size | Bubble Point | Test Pressure | |
| BVM0.20 | 22 psig in IPA/water | 17 psig* | |
| BVM0.45 | 38 psig in water | 28 psig | |
| BVM0.65 | 26 psig in water | 20 psig | |
| BVM0.80 | 16 psig in water | 11 psig | |
| *50/50 IPA/DI Water Solution | |||
| Packaging Economy | |
|---|---|
| Bulk packaging in case quantities to reduce material disposal | |
| 10 inch | 24 per carton |
| 20 inch | 12 per carton |
| 30 inch | 12 per carton |
| 40 inch | 9 per carton |
| Cartridge Series | Micron Rating |
Length | Support Materials | End Cap Configurations | Gasket/O-Ring Materials |
|---|---|---|---|---|---|
| ex. BVR Bev-Rite | 0.45 0.20 0.45 0.65 0.80 |
-10 10 20 30 40 | PP PP - Polypropylene | C7 C1-DOE flat open ends C3-SOE flat closed ends, external 222 O-ring C6-SOE flat closed end, external 226 O-ring C7-SOE fin end, external 226 O-ring C8-SOE fin end, external 222 O-ring | S S - Silicone (standard O-rings) E - EPDM |
