CPP & CPW Pleat-rite
Continuous Polypropylene Pleated Cartridges
Strainrite's CPP and CPW all-Polypropylene filter cartridges optimize throughput while achieving consistent and repeatable effluent quality. Our filter media is constructed on the latest continuous Micro-fiber blowing equipment that precisely control fiber diameter and integrity across the entire web. Utilizing state-of-the-art on-line monitoring equipment, we are able to deliver the industry's most uniform and consistent media ensuring unparalleled product consistency.
The CPP and CPW filters are manufactured in continuous lengths without binders or resins resulting in an extremely clean non-fiber releasing filter. All construction materials comply with FDA Title 21 of The Code of Federal Regulations for food and beverage contact.
Typical Applications
- Bleach
- General Chemical
- Water filtration
- Solvent filtration
- RO/DI prefiltration
- Liquefied sugar
- Waste Water
- CPP elements have over 6 sq.ft. of surface area per 10" equivalent
- CPW elements have 4.5 sq.ft. of surface area per 10" equivalent
- High efficiency media provides reliable, consistent and repeatable filtration results
- High surface area pleat design for greater surface area ensures longer service life, fewer changeouts and reduced operating costs per cartridge
- FDA Title 21 compliant for food and beverage contact
- 100% Polypropylene construction offers a wide range of chemical compatibility
- Thermally bonded construction to ensure a cleaner filtrate
| Product Efficiency | |
|---|---|
| Continuous Poly-Pleat | 99.98% Efficiency |
| CPP/CPW 0.2 | 0.2 μm |
| CPP/CPW 0.5 | 0.5 μm |
| CPP/CPW 1.0 | 1.0 μm |
| CPP/CPW 2.5 | 2.5 μm |
| CPP/CPW 5.0 | 5.0 μm |
| CPP/CPW 10.0 | 10.0 μm |
| CPP/CPW 15.0 | 15.0 μm |
| CPP/CPW 20.0 | 20.0 μm |
| CPP/CPW 40.0 | 40.0 μm |
| CPP/CPW 70.0 | 70.0 μm |
| Materials of Construction | |
|---|---|
| Filter Media: | Polypropylene Microfiber |
| Support Material: | Polypropylene |
| Hardware: | Polypropylene |
| Cage/Core: | Polypropylene |
| Sealing: | Thermal Bond |
| Seals: | Buna N, Fluorocarbon, EPDM FEP Encapsulated Fluorocarbon, PTFE, Silicone |
| Dimensions | |
| Outside Dia: | 2.55" (6.48cm) |
| Lengths: | 10" (25.4cm), 20" (50.8cm), 30" (76.2cm), 40" (102cm) |
| Performance Specification | |
| Retention Micron Rating: |
0.2, 0.5, 1.0, 2.5, 5.0, 10.0, 15.0, 20.0, 40.0, 70.0 |
| Maximum Forward Differential Pressure | |
| 75 psid @ 68°F (5.1 bar @ 20 C°) 40 psid @ 150°F (2.8 bar @ 65°C) |
|
| Maximum operating Temperature | |
| 180°F (82°C) Continuous Duty | |
| Toxicity | |
| All components meet all relevant USP XXII Class VI test for biological safety and FDA requirements for contact with food and beverage per 21CFR177.1520 | |
| Packaging Economy | |
| Bulk packaging in case quantities to reduce material disposal | |
| 10 inch | 24 per carton |
| 20 inch | 12 per carton |
| 30 inch | 12 per carton |
| 40 inch | 9 per carton |
| Cartridge Series | Micron Rating |
Length | End Cap Configurations | Gasket/O-Ring Materials | Cartridge Grade |
|---|---|---|---|---|---|
| ex. CPP
Continuous Poly-Pleat CPP CPW |
0.5 0.2 0.5 1.0 2.5 5.0 10.0 15.0 20.0 40.0 70.0 | -10 10 20 30 40 | C7 C1-Flat open ends C2-Recessed Cup/213 C3-Flat/222 C4-Flat closed ends C5-Recessed Cup/222 C6-Flat/226 C7-Fin/226 C8-Fin/222 | S S - Silicone (standard O-rings) B - Buna N (standard gaskets) V - Fluorocarbon E - EPDM T - PTFE TV - FEP Encapsulated Fluorocarbon | I - 316 Stainless Steel Insert |
