HSLP
High Solids Loading All Polypropylene Pleated Filter Cartridges
Strainrite continues its tradition of state-of-the-art advanced filtration innovation with the HSLP, a unique polypropylene depth filter that utilizes long strand small and large diameter fibers to provide a high solids loading, absoluterated, pleated depth filter. This binder-free depth media is excellent for removing gels and offers more than twice the surface area compared with industry standard non-pleated depth filters. The increased surface area provides higher flow rates at reduced pressure, resulting in increased filter life.
Our 100% polypropylene construction provides an excellent range of chemical compatibility for your most demanding applications. All polypropylene construction materials are CFR 21 listed for direct food contact, which makes this filter ideal for a broad range of applications.
Typical Applications
- Cosmetics
- Electroplating
- Fermentation processes
- Food and Beverage
- High purity water
- Pharmaceutical
- Photochemical
- RO pre-filtration
- Absolute-rated media provides reliable, consistent and repeatable filtration
- Low pressure drops yield higher flow rates and reduced processing time
- Maximized pleat design for greater surface area, ensuring longer service life, fewer changeouts and reduced operating costs per cartridge
- 100% Polypropylene, FDA compliant with CFR 21
- Thermally bonded construction, eliminating particle bypass
| Product Efficiency | |
|---|---|
| HSLP | 99.98% Efficiency |
| HSLP 1.0 | 1.0 μm |
| HSLP 2.5 | 2.5 μm |
| HSLP 5.0 | 5.0 μm |
| HSLP 10.0 | 10.0 μm |
| HSLP 15.0 | 15.0 μm |
| HSLP 20.0 | 20.0 μm |
| HSLP 25.0 | 25.0 μm |
| HSLP 35.0 | 35.0 μm |
| HSLP 70.0 | 70.0 μm |
| HSLP 90.0 | 90.0 μm |
| HSLP 120.0 | 120.0 μm |
| Materials of Construction | |
|---|---|
| Filter Media: | Polypropylene Microfiber Composite |
| Support Material: | Polypropylene |
| Hardware: | Polypropylene |
| Cage/Core: | Polypropylene |
| Sealing: | Thermal Bond |
| Seals: | Buna N, Fluorocarbon, EPDM FEP Encapsulated Fluorocarbon, PTFE, Silicone |
| Dimensions | |
| Outside Dia: | Extruded Cage - 2.55"(6.48cm) Molded Cage- 2.68"(6.81cm) |
| Lengths: | 10" (25.4cm), 20" (50.8cm), 30" (76.2cm), 40" (102cm) |
| Performance Specification | |
| Retention Micron Rating: |
1.0, 2.5, 5.0, 10.0, 15.0, 20.0, 25.0, 35.0, 70.0, 90.0, 120.0 |
| Maximum Forward Differential Pressure | |
| 75 psid @ 68°F (5.1 bar @ 20 C°) 40 psid @ 150°F (2.8 bar @ 65°C) |
|
| Maximum operating Temperature | |
| 180°F (82°C) Continuous Duty Polypropylene Hardware | |
| Toxicity | |
| All components meet all relevant USP XXII Class VI test for biological safety and FDA requirements for contact with food and beverage per 21CFR177.1520 | |
| Packaging Economy | |
| Bulk packaging in case quantities to reduce material disposal | |
| 10 inch | 24 per carton |
| 20 inch | 12 per carton |
| 30 inch | 12 per carton |
| 40 inch | 9 per carton |
| Cartridge Series | Micron Rating |
Length | End Cap Configurations | Gasket/O-Ring Materials | Cartridge Grade |
|---|---|---|---|---|---|
| ex. HSLP Poly-Pleat HSL | 1.0 1.0 2.5 5.0 10.0 15.0 20.0 25.0 35.0 70.0 90.0 120.0 | -10 10 20 30 40 | C7 C1-Flat open ends C2-Recessed Cup/213 C3-Flat/222 C4-Flat closed ends C5-Recessed Cup/222 C6-Flat/226 C7-Fin/226 C8-Fin/222 | S S - Silicone (standard O-rings) B - Buna N (standard gaskets) V - Fluorocarbon E - EPDM T - PTFE TV - FEP Encapsulated Fluorocarbon |
Blank-General
1 - FDA Grade
Options I - 316 Stainless Steel Insert MC- Molded Cage |
