Mem-PLEAT E
Pleated Polyethersulfone Hydrophilic Membrane Cartridges
The Mem-PLEAT E was developed for the filtration of process fluids that require a high degree of particle retention and/or a constant bacterial barrier for effective sterilization.
Hydrophilic asymmetric polyethersulfone membrane ensures excellent flow rates, broad chemical compatibility, low protein binding, low extractability, high mechanical strength and temperature resistance in a variety of applications for the biopharmaceutical, microelectronics, chemical, food and beverage industries.
The Mem-PLEAT E meets USP Biological Reactivity Test, in vivo for class VI-121°C plastics.
Typical Applications
- Liquid Clarification
- Chemical Filtration
- General-Use Water Filtration
- Deionized Water Systems
- High surface area membrane offers excellent life and flux rates, while providing absolute-rated filtration
- Absolute-rated membrane provides reliable, consistent and repeatable filtrate quality
- Low pressure drops yield higher flow rates and reduced processing time
- Non fiber-shedding Polyester and Polypropylene support materials eliminate fiber migration
- Pleat design for greater surface area, ensuring longer service life, fewer changeouts and reduced operating costs
- Thermally bonded construction without the use of adhesives or binders, resulting in lower extractables
- Low hold-up volumes
- Integrity tested
- High strength design allowing for extended use and multi autoclave cycles
| Materials of Construction | |
|---|---|
| Filter Media: | Polyethersulfone |
| Support Material: | Polypropylene, Polyester |
| End Caps: | Polypropylene |
| Cage/Core: | Polypropylene |
| Sealing: | Thermal Bond |
| Seals: | Buna N, Fluorocarbon, EPDM FEP Encapsulated Fluorocarbon, PTFE, Silicone |
| Dimensions | |
| Outside Dia: | 2.55" (6.48cm) |
| Lengths: | 10" (25.4cm), 20" (50.8cm), 30" (76.2cm), 40" (102cm) |
| Performance Specification | |
| Absolute Rated Retention: | 0.04, 0.10, 0.20, 0.45, 0.65, 0.80, 1.20 |
| Maximum Differential Pressure | |
| Forward: | 75 psid (5.5 bar) @ 75°F (24°C) 40 psid (2.8 bar) @ 180°F (82°C) |
| Reverse: | 50 psid (3.4 bar) @ 75°F (24°C) |
| Maximum operating Temperature | |
| 180°F (82°C) Continuous Duty | |
| Toxicity | |
| Cartridge materials meet USP Class VI and CFR 21 for food and beverage contact | |
| Sterilization | |
| Cartridge can be sterilized via steam or Autoclave: 20 times at 275°F (135°C) Cartridge may be sanitized in place with common sanitizing agents, contact factory for chemical compatibility |
|
| Packaging Economy | |
| Bulk packaging in case quantities to reduce material disposal | |
| 10 inch | 24 per carton |
| 20 inch | 12 per carton |
| 30 inch | 12 per carton |
| 40 inch | 9 per carton |
| Cartridge Series | Micron Rating |
Length | Support Materials | End Cap Configurations | Gasket/O-Ring Materials | Cartridge Grade |
|---|---|---|---|---|---|---|
| ex. MPE Mem-Pleat E | 0.45 0.04 0.10 0.20 0.45 0.65 0.80 1.20 | -10 10 20 30 40 | PP PE - Polyester PP - Polypropylene | C7 C1-Flat open ends C2-Recessed Cup/213 C3-Flat/222 C4-Flat closed ends C5-Recessed Cup/222 C6-Flat/226 C7-Fin/226 C8-Fin/222 | S S - Silicone (standard O-rings) B - Buna N (standard gaskets) V - Fluorocarbon E - EPDM T - PTFE TV - FEP Encapsulated Fluorocarbon |
Blank-General
1 - FDA Grade
2 - Pharmaceutical
5 - Water
Options I - 316 Stainless Steel Insert DIF - DI Flush |
