PES-E
Electronics Grade Pleated Polyethersulfone Membrane Cartridge
The PES-E was developed for microelectronics industry where a high degree of particle retention and/or constant bacterial barrier for effective sterilization is required.
Hydrophilic asymmetric polyethersulfone membrane ensures excellent flow rates, broad chemical compatibility, low protein binding, low extractability, high mechanical strength, and temperature resistance in a variety of applications in the microelectronics industry. The PES E is 100% integrity tested and utilizes Strainrite's double rinse process to ensure extremely low extractables. Polyethersulfone offers a broad range of chemical compatibility and temperature performance.
The PES-E meets USP Biological Reactivity Test, in vivo for class VI-121°C plastics. Sterilizable using industry recognized and accepted methods.
Typical Applications
- Liquid Clarification
- High Purity Chemical Filtration
- General-Use Water Filtration
- Deionized Water Systems
- High surface area membrane offers excellent life and flux rates while providing absolute filtration
- Absolute-rated membrane provides reliable, consistent and repeatable filtrate quality
- Low pressure drops yield higher flow rates and reduced processing time
- Non-fiber shedding Polypropylene support materials eliminate fiber migration
- MAXX-imum Pleat Design for greater surface area, ensuring longer service life, fewer change outs and reduced operating costs per element
- Thermally bonded construction without the use of adhesives or binders, resulting in lower extractables
- Integrity testable
- High strength design allowing for extended use
| Materials of Construction | |
|---|---|
| Filter Media | Polyethersulfone |
| Support Material: | Polypropylene |
| End Caps: | Polypropylene |
| Cage/Core: | Polypropylene |
| Sealing: | Thermal Bonded |
| Seals: | Buna N, Fluorocarbon, EPDM FEP Encapsulated Fluorocarbon, PTFE, Silicone |
| Dimensions | |
| Outside Dia: | 2.7" (6.87cm) |
| Lengths: | 10" (25.4cm), 20" (50.8cm), 30" (76.2cm), 40" (102cm) |
| Surface Area: | 6.8ft2 per 10" equivalent |
| *All Cartridges are 18 meg ohm flushed | |
| Performance Specifications | |
| Absolute Rated Retention in Nanometers | 50,100, 200, 450, 650, 800,1200 |
| Maximum Forward Differential Pressure | |
| Forward: | 75 psid (5.5 bar) @ 75°F (24°C) 40 psid (2.8 bar) @ 180°F (82°C) |
| Reverse: | 50 psid (3.4 bar) @ 75°F (24°C) |
| Maximum Operating Temperature | |
| 180°F (82°C) Continuous Duty | |
| Toxicity | |
| Cartridge materials meet USP Class VI and CFR 21 for food and beverage contact | |
| Sterilization | |
| Cartridge can be sterilized via steam or Autoclave: 20 times at 275°F (135°C) Cartridge may be sanitized in place with common sanitizing agents, contact factory for chemical compatibility | |
| Packaging Economy | |
| Bulk packaging in case quantities to reduce material disposal: | |
| 10 inch | 24 per carton |
| 20 inch | 12 per carton |
| 30 inch | 12 per carton |
| 40 inch | 9 per carton |
| Cartridge Series | Nanometers | Length | End Cap Configurations | Gasket/O-Ring Materials | Cartridge Grade |
|---|---|---|---|---|---|
| ex. PESE PES-E | 200 50 100 200 450 650 800 1200 | -10 10 20 30 40 | C7 C1-DOE flat open ends C2-SOE recessed cup, internal 213 O-ring C3-SOE flat closed ends, external 222 O-ring C4-SOE flat closed end C5-SOE recessed cup, external 222 O-ring C6-SOE flat closed end, external 226 O-ring C7-SOE fin end, external 226 O-ring C8-SOE fin end, external 222 O-ring | S S - Silicone (standard O-rings) B - Buna N (standard gaskets) V - Fluorocarbon E - EPDM T - PTFE TV - FEP Encapsulated Fluorocarbon | E
E- Electronics Options I - 316 Stainless Steel Insert T- Integrity Tested |
