Poly-MAXX Select
High Solids Loading All-Polypropylene Pleated Depth Cartridges
The Poly-Maxx Select is another example of Strainrite's continued tradition of providing industry leading filtration solutions. Poly-Maxx Select is an absolute rated gradient density pleated polypropylene depth cartridge. It utilizes our revolutionary HSL (High Solids Loading) technology in combination with our high efficiency micro-fiber meltblown creating one of the longest lasting high efficiency pleated filters on the market.
The Poly-Maxx Select filters are manufactured without binders or resins, resulting in an extremely clean non-fiber shedding filter. Due to our utilization of the HSL technology this element is outstanding for removing gels, compared to traditional pleated polypropylene filters. All materials of construction comply with FDA Title 21 of The Code of Federal Regulations for food and beverage contact.
Typical Applications
- Bleach
- Water filtration
- Solvent filtration
- RO/DI prefiltration
- Liquefied sugar
- Waste Water
- Wine clarification
- Absolute-rated media provides reliable, consistent and repeatable filtration results
- MAXX-imum pleat design for greater surface area, ensuring longer service life, fewer changeouts and reduced operating costs per cartridge
- FDA Title 21 compliant for food and beverage contact
- Lower pressure drops, which yield higher flow rates and reduced processing time
- 100% Polypropylene construction offers a wide range of chemical compatibility
- Thermally bonded construction ensures a cleaner filtrate while minimizing extractables
| Product Efficiency | |
|---|---|
| Poly-MAXX Select | 99.98% Efficiency |
| SPMX 1.0 | 1.0 μm |
| SPMX 1.5 | 1.5 μm |
| SPMX 3.0 | 3.0 μm |
| SPMX 5.0 | 5.0 μm |
| SPMX 10.0 | 10.0 μm |
| SPMX 15.0 | 15.0 μm |
| SPMX 20.0 | 20.0 μm |
| SPMX 40.0 | 40.0 μm |
| SPMX 70.0 | 70.0 μm |
| SPMX 90.0 | 90.0 μm |
| Materials of Construction | |
|---|---|
| Filter Media: | Polypropylene Microfiber Composite |
| Support Material: | Polypropylene |
| Hardware: | Polypropylene |
| Cage/Core: | Polypropylene |
| Sealing: | Thermal Bond |
| Seals: | Buna N, Fluorocarbon, EPDM FEP Encapsulated Fluorocarbon, PTFE, Silicone |
| Dimensions | |
| Outside Dia: | 2.7" (6.87cm) |
| Lengths: | 10" (25.4cm), 20" (50.8cm), 30" (76.2cm), 40" (102cm) |
| Performance Specification | |
| Retention Micron Rating: |
1.0, 1.5, 3.0, 5.0, 10.0, 15.0, 20.0, 40.0, 70.0, 90.0 |
| Maximum Forward Differential Pressure | |
| 75 psid @ 68°F (5.1 bar @ 20 C°) 40 psid @ 150°F (2.8 bar @ 65°C) |
|
| Maximum operating Temperature | |
| 180°F (82°C) Continuous Duty | |
| Toxicity | |
| All components meet all relevant USP XXII Class VI test for biological safety and FDA requirements for contact with food and beverage per 21CFR177.1520 | |
| Packaging Economy | |
| Bulk packaging in case quantities to reduce material disposal | |
| 10 inch | 24 per carton |
| 20 inch | 12 per carton |
| 30 inch | 12 per carton |
| 40 inch | 9 per carton |
| Cartridge Series | Micron Rating |
Length | End Cap Configurations | Gasket/O-Ring Materials | Cartridge Grade |
|---|---|---|---|---|---|
| ex. SPMX
Poly-MAXX Select |
1.0 1.0 1.5 3.0 5.0 10.0 15.0 20.0 40.0 70.0 90.0 | -10 10 20 30 40 | C7 C1-Flat open ends C2-Recessed Cup/213 C3-Flat/222 C4-Flat closed ends C5-Recessed Cup/222 C6-Flat/226 C7-Fin/226 C8-Fin/222 | S S - Silicone (standard O-rings) B - Buna N (standard gaskets) V - Fluorocarbon E - EPDM T - PTFE TV - FEP Encapsulated Fluorocarbon |
Blank-General
1 - FDA Grade
2 - Pharmaceutical
Options I - 316 Stainless Steel Insert DIF - DI Flush |
