Poly-MAXX
Polypropylene Pleated Depth Cartridges
Strainrite's Poly-MAXX, all-Polypropylene, filter cartridges are designed to optimize throughput while achieving absolute and repeatable effluent quality. Our filter media is constructed on the latest continuous Micro-Fiber blowing equipment that accurately controls fiber diameter and integrity. Utilizing state-of-the-art on-line monitoring equipment, Strainrite delivers the industry's most uniform and consistent media, ensuring unparalleled product consistency. Our 100% Polypropylene construction provides an expansive chemical compatibility range for your most demanding applications. All materials of construction meet the requirements of USP Class VI and CFR 21 for food and beverage contact.
Typical Applications
- Reagent Grade Chemicals
- General Water Filtration
- Recirculating Liquids
- Waste Water
- DI/RO Prefiltration
- Absolute-rated media provides reliable, consistent and repeatable filtration
- Low pressure drop yields higher flow rates and reduced processing time
- MAXX-imum pleat design for greater surface area, ensuring longer service life, less downtime and reduced operating costs per cartridge
- 100% Polypropylene, FDA compliant with CFR 21 and USP Class VI
- Thermally bonded construction minimizes extractables, eliminating particle bypass
| Product Efficiency | |
|---|---|
| Poly-MAXX | 99.98% Efficiency |
| PMX 1.0 | 1.0 μm |
| PMX 1.5 | 1.5 μm |
| PMX 2.5 | 2.5 μm |
| PMX 5.0 | 5.0 μm |
| PMX 10.0 | 10.0 μm |
| PMX 15.0 | 15.0 μm |
| PMX 20.0 | 20.0 μm |
| PMX 40.0 | 40.0 μm |
| PMX 70.0 | 70.0 μm |
| Materials of Construction | |
|---|---|
| Filter Media: | Polypropylene Microfiber |
| Support Material: | Polypropylene |
| Hardware: | Polypropylene |
| Cage/Core: | Polypropylene |
| Sealing: | Thermal Bond |
| Seals: | Buna N, Fluorocarbon, EPDM FEP Encapsulated Fluorocarbon, PTFE, Silicone |
| Dimensions | |
| Outside Dia: | 2.7" (6.87cm) |
| Lengths: | 10" (25.4cm), 20" (50.8cm), 30" (76.2cm), 40" (102cm) |
| Performance Specification | |
| Retention Micron Rating: |
1.0, 1.5, 2.5, 5.0, 10.0, 15.0, 20.0, 40.0, 70.0 |
| Maximum Forward Differential Pressure | |
| 75 psid @ 68°F (5.1 bar @ 20 C°) 40 psid @ 150°F (2.8 bar @ 65°C) |
|
| Maximum operating Temperature | |
| 180°F (82°C) Continuous Duty | |
| Toxicity | |
| All components meet all relevant USP XXII Class VI test for biological safety and FDA requirements for contact with food and beverage per 21CFR177.1520 | |
| Packaging Economy | |
| Bulk packaging in case quantities to reduce material disposal | |
| 10 inch | 24 per carton |
| 20 inch | 12 per carton |
| 30 inch | 12 per carton |
| 40 inch | 9 per carton |
| Cartridge Series | Micron Rating |
Length | End Cap Configurations | Gasket/O-Ring Materials | Cartridge Grade |
|---|---|---|---|---|---|
| ex. PMX Poly-MAXX | 1.0 1.0 1.5 2.5 5.0 10.0 15.0 20.0 40.0 70.0 | -10 10 20 30 40 | C7 C1-Flat open ends C2-Recessed Cup/213 C3-Flat/222 C4-Flat closed ends C5-Recessed Cup/222 C6-Flat/226 C7-Fin/226 C8-Fin/222 | S S - Silicone (standard O-rings) B - Buna N (standard gaskets) V - Fluorocarbon E - EPDM T - PTFE TV - FEP Encapsulated Fluorocarbon |
Blank-General
1 - FDA Grade
2 - Pharmaceutical
Options I - 316 Stainless Steel Insert DIF - DI Flush |
